Rogue RML-490C Power Rack 3.0 - Charcoal
Rogue RML-490C Power Rack 3.0 - Charcoal
Gear Specs | |
| Brand | Rogue Fitness |
| Color | Charcoal Gray |
| Made In USA | Yes |
| Product Weight | 340LB |
| Length | 49" |
| Width | 49" |
| Height | 90.375" |
| Foot Print | 53" x 53" |
| Steel Notes | 3x3" 11-Gauge Steel. Westside hole spacing through bench/squat area, 2" elsewhere |
Product Description
The RML-490C Power Rack 2.0 is available here in a special edition Charcoal colorway with some of our most popular Monster Lite add-ons included at a discounted price. The distinctive, textured charcoal gray upright finish has long been a favorite of the Rogue team in our custom installations, and it’s now being offered to the general public for the first time in this limited run, combined with a loaded line-up of accessories, including:
The Monster Lite Strap Safety System 2.0 - Made from 3" wide reinforced nylon, safety-rated for 10,000 LBS, with 0.3125" thick brackets (textured black) and a 5/8" diameter pin. The front and back ends of the strap hangers can be mounted at different heights, allowing a dropped bar to roll safely away from an athlete on a missed lift.
5/8” Ghost Roller J-Cups 2.0 - A patented conical roller (composite) and multi-radius concave receiver ensure each racked bar (25mm-50mm in diameter) safely returns to the front of the J-cup in an optimal position for the next lift. Includes fully welded, reinforced pin with a complete channel, plus UHMW linings to protect both the rack and the bar.
Laser-Cut Rogue Nameplate - Brings added stability to the unit while the textured black-on-black finish of the plate and crossmember make a great pairing with the distinct upright finish of the Charcoal edition.
The Charcoal RML-490 Rack is manufactured in Columbus, Ohio, from 3x3” 11-gauge steel, with 90” uprights and a 43” inside depth. It also comes standard with Slinger-compatible crossmembers, (1) 43” Single Pull-Up Bar, (4) band pegs, and all required 5/8” bolts and fasteners (all in black).
Please Note: The Charcoal Edition of the RML-490C cannot be selected with different color finishes on any of its components. For more colorway options, see the standard Rogue RML-490C Rack.
Important: The unit should be bolted to the floor. Floor mounting hardware is not included.
Read More
Rogue RML-490C Power Rack 3.0 - Charcoal
The RML-490C Power Rack 2.0 is available here in a special edition Charcoal colorway with some of our most popular Monster Lite add-ons included at a discounted price. The distinctive, textured charcoal gray upright finish has long been a favorite of the Rogue team in our custom installations, and it’s now being offered to the general public for the first time in this limited run, combined with a loaded line-up of accessories, including:
The Monster Lite Strap Safety System 2.0 - Made from 3" wide reinforced nylon, safety-rated for 10,000 LBS, with 0.3125" thick brackets (textured black) and a 5/8" diameter pin. The front and back ends of the strap hangers can be mounted at different heights, allowing a dropped bar to roll safely away from an athlete on a missed lift.
5/8” Ghost Roller J-Cups 2.0 - A patented conical roller (composite) and multi-radius concave receiver ensure each racked bar (25mm-50mm in diameter) safely returns to the front of the J-cup in an optimal position for the next lift. Includes fully welded, reinforced pin with a complete channel, plus UHMW linings to protect both the rack and the bar.
Laser-Cut Rogue Nameplate - Brings added stability to the unit while the textured black-on-black finish of the plate and crossmember make a great pairing with the distinct upright finish of the Charcoal edition.
The Charcoal RML-490 Rack is manufactured in Columbus, Ohio, from 3x3” 11-gauge steel, with 90” uprights and a 43” inside depth. It also comes standard with Slinger-compatible crossmembers, (1) 43” Single Pull-Up Bar, (4) band pegs, and all required 5/8” bolts and fasteners (all in black).
Please Note: The Charcoal Edition of the RML-490C cannot be selected with different color finishes on any of its components. For more colorway options, see the standard Rogue RML-490C Rack.
Important: The unit should be bolted to the floor. Floor mounting hardware is not included.
Gear Specs
Specifications
- Made in the USA
- Uprights: 3x3” 11-Gauge Steel - 90” Height
- NEW Textured Charcoal Gray Upright Finish
- 5/8” Bolts and Fasteners - Black
- Interior Depth: 43”
- Westside Hole Pattern – 1” through bench and clean pull zone then 2” spacing above and below
- Rogue Nameplate - Texture Black crossmember, Texture Black laser-cut Rogue branding
- Holes in top/bottom of crossmembers for Slinger compatibility
- Choice of uprights with or without laser-cut numbering
- (1) 43” Single Skinny Pull-Up Bar - Texture Black
- (2) Ghost Roller J-Cups - Texture Black
- (2) Strap Safeties - Texture Black
- (4) Band Pegs
- Important: Unit should be bolted to floor unless stabilizer is added. Mounting Hardware Not Included
Shipping
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
Limited Edition with Premium Add-Ons
This limited edition of the RML-490 is inspired by a colorway and configuration used in some of our favorite custom installations, with top-tier Monster Lite accessories included. As with the standard edition, the Charcoal RML-490 Rack is Made in the USA using 3x3" 11-gauge steel tubing with 5/8” holes in the Westside pattern. It comes standard with J-cups, strap safeties, a 43” single pull-up bar, and (4) band pegs, and can be customized with our full line-up of exclusive Monster Lite add-ons and attachments.
Please Note: The unit should be bolted to the floor. Floor mounting hardware is not included.
Unique Charcoal Finish
This Special Edition of the RML-490C Rack introduces a new textured charcoal gray upright finish, which we’ve combined with a textured black single pull-up bar, crossmembers, logo plate, strap safety brackets, and J-cups (plus black hardware) for a very distinct look. The charcoal colorway is one we’ve used in custom installations with great, long-lasting results, and it’s available here to the public for the first time in a limited run. The color finishes cannot be changed with this edition. See our standard RML-490C Rack 3.0 page for more options.
Ghost Roller J-Cup Pair
The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off. Included here with a composite roller and textured black finish. Rackable Depth: 2.875".
Rogue Nameplate
This laser-cut, Rogue-branded plate features an exclusive black-on-black format with a texture black nameplate + crossmember. Along with creating a fantastic look above the charcoal uprights, this feature also adds extra lateral stability to the unit, as well.
Monster Lite Strap Safeties
These 3" wide reinforced nylon straps are designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000 LBS. A clasp and pin design securely locks the system into place and allows for easy, quick adjustments. Available here with a textured black bracket finish.
Combine with Other Monster Lite Products
You can customize your system with the addition of a bar, bench, plates, or a range of compatible tools and accessories designed specifically for the Rogue Monster Lite Series. This includes our SAML-24 Safety Spotter Arms, the Rogue ML Matador, Adjustable Monolift, Plate Storage Channel Pair, the Single Bar Holder, the Slinger, and many more.Version 3.0 is specifically designed for better compatibility with the lat-pulldown Slinger system, as holes are now included in the top and bottom of the crossmembers to allow the cable to pass through freely.
